您现在的位置是:Instagram刷粉絲, Ins買粉絲自助下單平台, Ins買贊網站可微信支付寶付款 >
03 ros發布和訂閱python(ROS使用python3)
Instagram刷粉絲, Ins買粉絲自助下單平台, Ins買贊網站可微信支付寶付款2024-07-28 01:44:37【】6人已围观
简介/p> self.cmd_vel=rospy.Publisher('/cmd_vel',Twist,queue_size=5)
self.cmd_vel = rospy.Publisher('/cmd_vel', Twist, queue_size=5)
rate = 20
r = rospy.Rate(rate)
linear_speed = 0.2
goal_distance =1.0
angular_speed = 1.0
goal_angle = pi
angular_tolerance = radians(2.5)
# Initialize tf listener, and give some time to fill its buffer
self.tf_listener = tf.TransformListener()
rospy.sleep(2)
# Set odom_frame and base_frame
self.odom_frame = '/odom'
try:
self.tf_listener.waitForTransform(self.odom_frame,
'/base_footprint',
rospy.Time(),
rospy.Duration(1.0))
self.base_frame = '/base_footprint'
except(tf.Exception, tf.ConnectivityException, tf.LookupException): try:
self.tf_listener.waitForTransform(self.odom_frame,
'/base_link',
rospy.Time(),
rospy.Duration(1.0))
self.base_frame = '/base_link'
except(tf.Exception, tf.ConnectivityException, tf.LookupException):
rospy.loginfo("Cannot find base_frame transformed from /odom")
rospy.signal_shutdown("tf Exception")
position = Point()
for i in range(2):
move_cmd = Twist()
move_cmd.linear.x = linear_speed # Initial pose, obtained from internal odometry
(position, rotation) = self.get_odom()
x_start = position.x
y_start = position.y
distance = 0
# Keep publishing Twist msgs, until the internal odometry reach the goal
while distance < goal_distance and not rospy.is_shutdown():
self.cmd_vel.publish(move_cmd)
r.sleep()
(position, rotation) = self.get_odom()
distance = sqrt( pow( (position.x-x_start), 2 ) + \
pow( (position.y-y_start), 2 ) )
# Stop 1 ms before rotate
move_cmd = Twist()
self.cmd_vel.publish(move_cmd)
rospy.sleep(1)
move_cmd.angular.z = angular_speed # should be the current ration from odom
angle_last = rotation
angle_turn = 0 while abs(angle_turn+angular_tolerance) < abs(goal_angle) \ and not rospy.is_shutdown():
self.cmd_vel.publish(move_cmd)
r.sleep()
(position, rotation) = self.get_odom
delta_angle = normalize_angle(rotation - angle_last)
angle_turn += delta_angle
angle_last = rotation
move_cmd = Twist()
self.cmd_vel.publish(move_cmd)
rospy.sleep(1)
self.cmd_vel.publish(Twist())
def get_dom(self): try:
(trans, rot) = self.tf_listener.lookupTransfrom(self.odom_frame,
&
很赞哦!(23865)
相关文章
- 02 貝殼海外房產沒有了(壟斷陰影未除,失去左暉的貝殼還能走多遠?)
- 02 談談你對中國對外貿易的感想(聯系國際貿易理論知識,談談如何發展中國對外貿易?論文3000字以上。)
- 附近高壓油管加工店(我是做高壓油管加工的。我想要擴大市場,我可以嘗試做液壓哪方面的生意)
- 韓國油管網紅嘲諷日本(油管網紅RiceGum辱華事件該如何看待)
- 頂吸油煙機煙管開孔高度尺寸(油煙機管道尺寸大概是多少)
- 韓國油管是什么意思啊(韓飯說的油管是什么)
- 雅馬哈125化油器油管安裝圖(豪爵鈴木en125-2a真空化油器管子怎么裝)
- 附近啤喉油管地點(叉車升降油缸的液壓油管接頭斷了拿到啤喉店能搞好嗎還有其他辦法修嗎?)
- 附近啤液壓油管啤管在哪里(怎樣啤高壓油管)
- 韓國藝人tiktok排名(tiktok在韓國封禁了嗎)